ISO 14001 Standards Certification

ISO 14001 Standards Certification

ISO 14001 sets out a system that can be audited and certified. In many cases, it is the issue of certification that is critical or controversial and is at the heart of the discussion about the trade implications.

Certification means that a qualified body (an “accredited certifier”) has inspected the EMS system that has been put in place and has made a formal declaration that the system is consistent with the requirements of ISO 14001.

The standard allows for “self-certification,” a declaration by an enterprise that it conforms to ISO 14001. There is considerable skepticism as to whether this approach would be widely accepted, especially when certification has legal or commercial consequences. At the same time, obtaining certification can entail significant costs, and there are issues relating to the international acceptance

of national certification that may make it particularly difficult for companies in some countries to achieve credible certification at a reasonable cost. For firms concerned about having certification that carries real credibility, the costs of bringing in international auditors are typically quite high, partly because the number of internationally recognized firms of certifiers is limited at present.2

The issue of accreditation of certifiers is becoming increasingly important as the demand increases.

Countries that have adopted ISO 14001 as a national standard can accredit qualified companies as certifiers, and this will satisfy national legal or contractual requirements. However, the fundamental purpose of ISO is to achieve consistency internationally. If certificates from certain countries or agencies are not fully accepted or are regarded as “second class,” the goal will not have been achieved. It is probable that the international marketplace will eventually put a

real commercial value on high-quality certificates, but this level of sophistication and discrimination has not yet been achieved. It is essential to the ultimate success of the whole system that there be a mechanism to ensure that certification in any one country has credibility and acceptability elsewhere.

The ISO has outlined procedures for accreditation and certification (Guides 61 and 62), and a formal body, QSAR, has been established to operationalize the process. At the same time, a number of established national accreditation bodies

heavily involved in ISO have set up the informal International Accreditation Forum (IAF) to examine mechanisms for achieving international reciprocity through multilateral agreements (MLAs). However, these systems are in the early

stages, and many enterprises continue to use the established international certifiers, even at additional cost, because of lack of confidence in the acceptability of local certifiers.

Given the variability in the design of individual EMS and the substantial costs of the ISO 14000 certification process, there is a growing tendency for large companies that are implementing EMS approaches to pause before taking this

last step. After implementing an EMS and confirming that the enterprise is broadly in conformance with ISO 14001, it is becoming routine to carry out a “gap analysis” to determine exactly what further actions would be required to achieve

certification and to examine the benefits and costs of bringing in third-party certifiers.

ISO 14001 Standards Certification

ISO 14001 Standards sets out a system that can be audited and certified. In many cases, it is the issue of certification that is critical or controversial and is at the heart of the discussion about the trade implications.

Certification means that a qualified body (an “accredited certifier”) has inspected the EMS system that has been put in place and has made a formal declaration that the system is consistent with the requirements of ISO 14001 Standards.

The standard allows for “self-certification,” a declaration by an enterprise that it conforms toISO 14001 Standards. There is considerable skepticism as to whether this approach would be widely accepted, especially when certification has legal or commercial consequences. At the same time, obtaining certification can entail significant costs, and there are issues relating to the international acceptance

of national certification that may make it particularly difficult for companies in some countries to achieve credible certification at a reasonable cost. For firms concerned about having certification that carries real credibility, the costs of bringing in international auditors are typically quite high, partly because the number of internationally recognized firms of certifiers is limited at present.2

The issue of accreditation of certifiers is becoming increasingly important as the demand increases.

Countries that have adopted ISO 14001 Standards as a national standard can accredit qualified companies as certifiers, and this will satisfy national legal or contractual requirements. However, the fundamental purpose of ISO is to achieve consistency internationally. If certificates from certain countries or agencies are not fully accepted or are regarded as “second class,” the goal will not have been achieved. It is probable that the international marketplace will eventually put a

real commercial value on high-quality certificates, but this level of sophistication and discrimination has not yet been achieved. It is essential to the ultimate success of the whole system that there be a mechanism to ensure that certification in any one country has credibility and acceptability elsewhere.

The ISO has outlined procedures for accreditation and certification (Guides 61 and 62), and a formal body, QSAR, has been established to operationalize the process. At the same time, a number of established national accreditation bodies

heavily involved in ISO have set up the informal International Accreditation Forum (IAF) to examine mechanisms for achieving international reciprocity through multilateral agreements (MLAs). However, these systems are in the early

stages, and many enterprises continue to use the established international certifiers, even at additional cost, because of lack of confidence in the acceptability of local certifiers.

Given the variability in the design of individual EMS and the substantial costs of the ISO 14000 certification process, there is a growing tendency for large companies that are implementing EMS approaches to pause before taking this

last step. After implementing an EMS and confirming that the enterprise is broadly in conformance with ISO 14001 Standards, it is becoming routine to carry out a “gap analysis” to determine exactly what further actions would be required to achieve

certification and to examine the benefits and costs of bringing in third-party certifiers.

General Description of ISO14001 Standards

General Description of ISO14001 Standards

ISO14001 Standards requires an Environmental Policy to be in existence within the organisation, fully supported by senior management, and outlining the policies of the company, not only to the staff but to the public. The policy needs to clarify compliance with Environmental Legislation that may effect the organization and stress a commitment to continuous improvement. Emphasis has been placed on policy as this provides the direction for the remainder of the Management System.

Those companies who have witnessed ISO9000 Assessments will know that the policy is frequently discussed during the assessment, many staff are asked if they understand or are aware of the policy, and any problems associated with the policy are seldom serious. The Environmental Policy is different, this provides the initial foundation and direction for the Management System and will be more stringently reviewed than a similar ISO9000 policy. The statement must be publicised in non-technical language so that it can be understood by the majority of readers. It should relate to the sites within the organisation encompassed by the Management System, it should provide an overview of the company’s activities on the site and a description of those activities. A clear picture of the company’s operations.

The preparatory review and definition of the organization’s environmental effects is not part of a ISO14001 Assessment, however examination of this data will provide an external audit with a wealth of information on the methods adopted by the company. The preparatory review itself should be comprehensive in consideration of input processes and output at the site. This review should be designed to identify all relevant environmental aspects that may arise from existence on the site. These may relate to current operations, they may relate to future, perhaps even unplanned future activities, and they will certainly relate to the activities performed on site in

the past (i.e. contamination of land).

The initial or preparatory review will also include a wide-ranging consideration of the legislation which may effect the site, whether it is currently being complied with, and perhaps even whether copies of the legislation are available. Many of the environmental assessments undertaken already have highlighted that companies are often unaware of ALL of the legislation that affects them, and being unaware, are often not meeting the requirements of that legislation.

The company will declare its primary environmental objectives, those that can have most environmental impact. In order to gain most benefit these will become the primary areas of consideration within the improvement process, and the company’s environmental program. The program will be the plan to achieve specific goals or targets along the route to a specific goal and describe the means to reach those objectives such that they are real and achievable. TheEnvironmental Management System provides further detail on the environmental program. The EMS establishes procedures, work instructions and controls to ensure that implementation of the policy and achievement of the targets can become a reality. Communication is a vital factor, enabling people in the organisation to be aware of their responsibilities, aware of the objectives of the scheme, and able to contribute to its success.

As with ISO 9000 the Environmental Management System requires a planned comprehensive periodic audit of the Environmental Management System to ensure that it is effective in operation, is meeting specified goals, and the system continues to perform in accordance with relevant regulations and standards. The audits are designed to provide additional information in order to exercise effective management of the system, providing information on practices which differ to the current procedures or offer an opportunity for improvement.

In addition to audit, there is a requirement for Management Review of the system to ensure that it is suitable (for the organization and the objectives) and effective in operation. The management review is the ideal forum to make decisions on howe to improve for the future.

Environmental Aspects (ISO 14001:2004, §4.3.1)

The requirement of §4.3.1 of ISO 14001 is to establish and maintain procedures 1) for identifying theenvironmental aspects of the organization’s activities, products, and services that it can control and those that it can influence and 2) for determining which of those aspects have or can have a significant impact on the environment. Understanding the requirement of this element of ISO 14001 is central to understanding the concept of an environmental management system.

A single manufacturing facility has potentially hundreds of environmental aspects. How far must it go in identifying its environmental aspects to satisfy the terms of the requirement? ISO 14001 specifies that the organization is to identify those aspects that it can control and those that it can influence and that it must also take into account planned or new developments and new or modified activities, products, and services. These stipulations in the requirements, without actually drawing boundaries on how far the organization must go in identifyingenvironmental aspects, at least establish some categories of aspect that must be considered. Beyond this principle, each organization must identify its aspects comprehensively enough so as to not fail to identify a significant aspect or a legal requirement. An objection to comprehensive identification of aspects is that the organization may become so immersed in aspects identification that it loses sight of the end objective of the procedure, which is to determine significance.

“Significant impact” is not a stand-alone term in §4.3.1. It is accompanied by the phrase “impact on the environment” and “environment” is a defined term. Significant aspects, then, are those environmental aspects that have or can have significant impacts on air, water, land, natural resources, flora, fauna, and humans. The organization determines, using its own criteria, what magnitude of impact on these seven environmental receptors constitutes a significant impact. Whether an aspect is regulated is not intended to be a factor in determining significance.

Proper execution of the environmental aspects procedure is important, in part, because it lifts environmental management out of the regulatory compliance mode and into the mode ofsystematically consequences for the environment, irrespective of regulation. The organization that rigorously applies the environmental aspects procedure discovers many opportunities to improve environmental performance that regulation does not address, including:· Use of energy

· Consumption of materials

· Environmental impacts of employee activities

· Environmental impacts of products and by-products post-manufacture, including distribution, use, reuse, and disposal

· Environmental impacts of services

· Unregulated waste streams such as carbon dioxide

identifying environmental aspects and impacts and considering their

ISO 14001 Standards – Emergency Preparedness and Response Plans

ISO 14001 Section 4.4.7, Emergency Preparedness and Response, requires that organizations establish and maintain procedure(s) to:

1. Identify potential accidents and emergencies

2. Respond to accidents and emergencies

3. Prevent and mitigate the environmental impacts that may be associated with accidents and emergencies.

Section 4.4.7 also requires that organizations review and revise, when necessary, their emergency preparedness

and response procedure(s), especially after an accident or emergency situation. Organizations must also periodically test such procedures where practicable.

Most organizations have already developed and implemented emergency response plans to comply with various federal and state regulations that require such plans. Examples of federal regulations that require such plans include:

• Resource Conservation and Recovery Act (RCRA) Contingency Plans

• Spill Prevention, Control, and Countermeasures (SPCC) Plans

• Facility Oil Response Plans under the Oil Pollution Prevention Act of 1990

• Employee Emergency and Fire Prevention Plans under Occupational Safety and Health Administration (OSHA).

Some states have regulations that require similar emergency response plans. For instance, the state of Pennsylvania requires certain facilities to develop and implement a Preparedness, Prevention, and Contingency (PPC) Plan in addition to federal requirements.

The ISO 14001 requirements are similar to the requirements of most regulatory emergency plans. Whether your facility has emergency response plans or not, you should review the following sections to ensure you meet the ISO 14001 emergency response requirements.

ISO 14001 Section 4.4.7, Emergency Preparedness and Response, requires that organizations establish and maintain procedure(s) to:

1. Identify potential accidents and emergencies

2. Respond to accidents and emergencies

3. Prevent and mitigate the environmental impacts that may be associated with accidents and emergencies.

Section 4.4.7 also requires that organizations review and revise, when necessary, their emergency preparedness

and response procedure(s), especially after an accident or emergency situation. Organizations must also periodically test such procedures where practicable.

Most organizations have already developed and implemented emergency response plans to comply with various federal and state regulations that require such plans. Examples of federal regulations that require such plans include:

• Resource Conservation and Recovery Act (RCRA) Contingency Plans

• Spill Prevention, Control, and Countermeasures (SPCC) Plans

• Facility Oil Response Plans under the Oil Pollution Prevention Act of 1990

• Employee Emergency and Fire Prevention Plans under Occupational Safety and Health Administration (OSHA).

Some states have regulations that require similar emergency response plans. For instance, the state of Pennsylvania requires certain facilities to develop and implement a Preparedness, Prevention, and Contingency (PPC) Plan in addition to federal requirements.

The ISO 14001 requirements are similar to the requirements of most regulatory emergency plans. Whether your facility has emergency response plans or not, you should review the following sections to ensure you meet the ISO 14001 emergency response requirements.

Monitoring and Measurement In ISO 14001 Standards

Monitoring and Measurement In ISO 14001 Standards

The Monitoring and Measurement section contains two requirements:

1) Measurement and monitoring of environmental performance associated with operations that can have a significant impact on the environment; and

2) Calibration and maintenance of equipment used for environmental monitoring and measurement.

Monitoring and Measuring of Performance — This section calls for a“procedure to monitor and measure… key characteristics of… operations that can have a significant impact on the environment.”

Note that the section does not specifically require the organization to monitor and measure the significant environmental impacts of its products or services. As a practical matter, however, organizations should establish measurements over all environmental aspects that they determine are significant irrespective of whether the impacts relate to an activity, product, or service.

This section also requires the documentation“of information to monitor performance, applicable operational controls, and… environmental objectives and targets.” §4.6,

Management Review, requires that environmental performance and achievement of objectives and targets become inputs into the Management Review (sub-sections c & d).

Calibration and Maintenance — The requirement of having a calibration system is to ensure that measurements are reliable and accurate. A calibration system may be developed following these steps:

· Identification of measurements to be made;

· Identification of equipment, instruments, hardware and software to be used;

· Identification of the testing methods to be used;

· Determination of the accuracy and precision required or desired;

· Definition of calibration procedures;

· Use of the system;

· Establishment of records;

· If equipment is found to be out of calibration, corrective action; and

· Improvement of the system as necessary.

Environment Awareness – Implement Environmental Management System

Save OUR EARTH!!! Go For ISO 14001 Standards – Environmental Management System. If all companies implement ISO 140001 Standards – Environmental Management System in the organization, it will help us to protect our environment.

General Description of ISO14001 Standards

General Description of ISO14001 Standards

ISO14001 Standards requires an Environmental Policy to be in existence within the organisation, fully supported by senior management, and outlining the policies of the company, not only to the staff but to the public. The policy needs to clarify compliance with Environmental Legislation that may effect the organization and stress a commitment to continuous improvement. Emphasis has been placed on policy as this provides the direction for the remainder of the Management System.

Those companies who have witnessed ISO9000 Assessments will know that the policy is frequently discussed during the assessment, many staff are asked if they understand or are aware of the policy, and any problems associated with the policy are seldom serious. The Environmental Policy is different, this provides the initial foundation and direction for the Management System and will be more stringently reviewed than a similar ISO9000 policy. The statement must be publicised in non-technical language so that it can be understood by the majority of readers. It should relate to the sites within the organisation encompassed by the Management System, it should provide an overview of the company’s activities on the site and a description of those activities. A clear picture of the company’s operations.

The preparatory review and definition of the organization’s environmental effects is not part of a ISO14001 Assessment, however examination of this data will provide an external audit with a wealth of information on the methods adopted by the company. The preparatory review itself should be comprehensive in consideration of input processes and output at the site. This review should be designed to identify all relevant environmental aspects that may arise from existence on the site. These may relate to current operations, they may relate to future, perhaps even unplanned future activities, and they will certainly relate to the activities performed on site in

the past (i.e. contamination of land).

The initial or preparatory review will also include a wide-ranging consideration of the legislation which may effect the site, whether it is currently being complied with, and perhaps even whether copies of the legislation are available. Many of the environmental assessments undertaken already have highlighted that companies are often unaware of ALL of the legislation that affects them, and being unaware, are often not meeting the requirements of that legislation.

The company will declare its primary environmental objectives, those that can have most environmental impact. In order to gain most benefit these will become the primary areas of consideration within the improvement process, and the company’s environmental program. The program will be the plan to achieve specific goals or targets along the route to a specific goal and describe the means to reach those objectives such that they are real and achievable. TheEnvironmental Management System provides further detail on the environmental program. The EMS establishes procedures, work instructions and controls to ensure that implementation of the policy and achievement of the targets can become a reality. Communication is a vital factor, enabling people in the organisation to be aware of their responsibilities, aware of the objectives of the scheme, and able to contribute to its success.

As with ISO 9000 the Environmental Management System requires a planned comprehensive periodic audit of the Environmental Management System to ensure that it is effective in operation, is meeting specified goals, and the system continues to perform in accordance with relevant regulations and standards. The audits are designed to provide additional information in order to exercise effective management of the system, providing information on practices which differ to the current procedures or offer an opportunity for improvement.

In addition to audit, there is a requirement for Management Review of the system to ensure that it is suitable (for the organization and the objectives) and effective in operation. The management review is the ideal forum to make decisions on howe to improve for the future.